How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22927
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

Dishwasher starts goes about two minutes then the control

Customer Question

Dishwasher starts goes about two minutes then the control panel goes blank and then comes back on and says press start to continue but it will not continue
Submitted: 2 years ago.
Category: Appliance
Expert:  Kelly replied 2 years ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! I suspect you may have loose connections at the main supply wiring. That is pretty common, especially when aluminum wiring is present. The connection box is behind the access panel under the door, on the right side. Can you access that connection box and remove the cover and see if the connections appear secure, please?