How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22291
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

How to fix error code 01 on Electrolux model EWDW6505GS0.

Customer Question

How to fix error code 01 on Electrolux model EWDW6505GS0. There was water in the pan but no leaks now. Put over the sink to check for leak and found none.
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.

Hello and thanks for using this service, if you have been waiting do not worry or get upset I am just one of the techs on here and I try to get to as many customers as I can and I just picked up your question now. Please give me time to respond as typing, researching and adding links takes me time to do so please be patient and often I will ask you questions to narrow down the issue to get is diagnosed correctly.

Did you dry up all the water so the sensor is no longer sensing water under the unit in the flood basin?

Customer: replied 1 year ago.
Please read ALL of my initial comments.
Customer: replied 1 year ago.
Of course.
Expert:  Appliance Guru replied 1 year ago.

So with it all dry you are still getting the E01 code?

Customer: replied 1 year ago.
I want all responses in writing.
Customer: replied 1 year ago.
Did you read all my remarks?
Customer: replied 1 year ago.
Still there?
Customer: replied 1 year ago.
If this is your best effort, I want a refund.
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The sensor is likely faulty and will need to be replaced and is available below.