How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10392
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

My Maytag Bravos washer was giving a 'LD' code and would not

Customer Question

My Maytag Bravos washer was giving a 'LD' code and would not continue. I ran the calibration on it and now it fills and just stops.
Submitted: 2 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 2 years ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

Can I please have the Full model number of the unit to better assist you ?
LD is for a long drain ,do you have standing water in the washer at this time?

And what type of detergent do you use? He or none HE?

Customer: replied 2 years ago.
MTW6600TQ is the model number. I do not have standing water at this time. I unplugged and then plugged and it drained the clothes. I then ran the calibration on it and it seemed to fix the problem. I only use HE detergent in my machine.
Expert:  Whrlp Master Tech replied 2 years ago.

when you unplugged it how long was it unplugged for ? before you plugged it back in

and how much HE detergent per load do you use?

Customer: replied 2 years ago.
It was unnplugged for about 3-5 minutes. I use Tide pods, one per load.
Expert:  Whrlp Master Tech replied 2 years ago.

ok so if it was closer to the 5 minutes that is long enough for the main control to loose it`s memory and start fresh .

Have you ever used a washer cleaner in the unit?

And do you use more cold water washes the other temperatures?

Customer: replied 2 years ago.
I have used affresh sometimes, but usually use bleach to clean. Yes I do more cold water washes than any others.
Expert:  Whrlp Master Tech replied 2 years ago.

Bleach kills mold and mildew but it does not get ride of mineral or detergent deposits left in the washer.

And make sure that you are using the cold water HE detergent when using cold water washes.

not all HE detergents are meant for cold water.

Customer: replied 2 years ago.
if this continues to happen have I followed the correct steps to fix?
Expert:  Whrlp Master Tech replied 2 years ago.

If it comes back clean the washer with Affresh twice ,and if it still comes back the replace the control board.

Customer: replied 2 years ago.
Ok thank you for the advice. Hopefully all is well now.
Expert:  Whrlp Master Tech replied 2 years ago.

glad to assist you anytime.

If you need me again for any other issues you can request me Whrlp Master Tech.

And Even after you rate me Today if you have a question just reply back to me,
I will still assist you, no extra charges .
But rating me is the ONLY way I get paid for my time.