How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 10565
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

Bob, I have a 2010 Whirlpool Cabrio electric dryer. The

Customer Question

Hello Bob,I have a 2010 Whirlpool Cabrio electric dryer. The dryer won't run. It turns on, but I can't get past the "sensing" signal. I thought the F1 fault code meant something was wrong with the control board and have replaced the control board. I get stuck at the same place, "sensing". The old and new boards look perfect. There must be someway to re-boot the machine.Mike(###) ###-####
Submitted: 2 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 2 years ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

Can I please have the Full model number of the unit to better assist you ?

Customer: replied 2 years ago.
The model number is *****
Expert:  Whrlp Master Tech replied 2 years ago.

Thank you does the time display count down when you have the "sensing" light on?

if you open the dryer door ,will the interior light come on?

Customer: replied 2 years ago.
to both questions above, time display and interior light
Expert:  Whrlp Master Tech replied 2 years ago.

Ok do you have a Volt -Ohm meter and know how to use it ? to be able to do any testing?