How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79547
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I remove the two pinouts on my maytag wmvb300wq0 washer

Customer Question

i remove the two pinouts on my maytag wmvb300wq0 washer circuit board. I stepped away just want to be sure I put them back in the right position
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

OK I have your wiring schematic pulled up. Which 2 wire harnesses did you have unplugged? What color are the wires and how many wires are on each wire? The board should say P7 or P5 or something like that where the wires should plug into---can you tell me which receptacles you have open?

Customer: replied 1 year ago.
tyler, I was able to figure it out. I went down to the washer to get more information and saw that the wire plugs had nubs on them. they would only go into one slot.. smart of maytag for doing that.
Expert:  Tyler Z. replied 1 year ago.

alright, sounds good.