How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22846
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

How do I remove lid to replace selector knob on front of

Customer Question

How do I remove lid to replace selector knob on front of ARXF129W washer I removed 2 screws on back corners of washer. What is holding the front?
Submitted: 2 years ago.
Category: Appliance
Expert:  Kelly replied 2 years ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! Once the rear screws are removed, the top should slide back and release from the tabs in the front. Will the top not slide back to release?

Customer: replied 2 years ago.
No it wont i am afraid i will break it are there anyother screws other then the ones on top rear corners
Expert:  Kelly replied 2 years ago.

See the picture below.