How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14616
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

Have a stacking washer dryer set affinity model and the

Customer Question

Have a stacking washer dryer set affinity model and the front loading washer is flashing 7 and stopping and starting. Took 2 hrs for one load of clothes. Had to change settings etc. to just stop and unlock the door. Shut off power to try and reset the system but it is still flashing 7. What does that mean?
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.

Hello, it just flashes the number 7 with no other letters or numbers correct?

Customer: replied 1 year ago.
Correct just 7
Expert:  Appliance Guru replied 1 year ago.

OK you have a bad main control board. You need to replace the main control board in the console to repair that issue. It is common on the Affinity models, that is not an error code, just an EEPROM error on the board.