How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14786
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

Bertazzoni range won't light. Does something need

Customer Question

Bertazzoni range won't light. Does something need adjusting?
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.

DO you hear the clicking from the spark module and do you get small pilot flame with it going out?

Customer: replied 1 year ago.
Expert:  Appliance Guru replied 1 year ago.

OK can you clean the spark electrode rod off with some light sand paper?

Customer: replied 1 year ago.
if you tell me where it is. Is it near where I see the spark through the hole in the bottom of the oven? And if so, how do I get in there?
Expert:  Appliance Guru replied 1 year ago.

You need to remove the bottom plate in the oven, can you do that?

Customer: replied 1 year ago.
Do I remove the front retaining ring first? And, do I sand the whole electrode rod or just the end?
Expert:  Appliance Guru replied 1 year ago.

Sand the whole electrode rod and you may have to remove the retaining ring if you can not get at it.