How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Repair manual needed.

Customer Question

repair manual needed.
Submitted: 2 years ago.
Category: Appliance
Expert:  Appliance Guru replied 2 years ago.

The repair manual will not help with this issue. You have one wire that you do not know where it goes or two and is it white or are they both white that you are not sure?

Customer: replied 2 years ago.
2 white wires go into a small rectangular box 1/4'' thick & about 1'' X 1/2'' there is a small button on one end and 2 small slits like a small socket
Customer: replied 2 years ago.
the wires come up from the door panel and plug in or near the latch mechanism.
Expert:  Appliance Guru replied 2 years ago.

Can you upload a pic of it?

Customer: replied 2 years ago.
purchased parts for door latch-to remove mechanism I had to remove two white connected to a small black plastic rectangular piece as I described before. the work was interrupted for two weeks and my identifying mark for those wires was lost. and reassembling the latch I do not find a place for the wires.
Expert:  Appliance Guru replied 2 years ago.

DO you see the schematic taped on the bottom kick panel?

Customer: replied 2 years ago.
nothing in the kick plate. probably taken by installers.
Expert:  Appliance Guru replied 2 years ago.

OK let me try to get the wiring diagram to help you, I am still out on the road and will get back to you tonight.