How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1717
Experience:  worked on appliances for around 15 years
76126576
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

I believe I coded my bosch washer but now I can't exit

Customer Question

I believe I coded my bosch washer but now I can't exit coding mode
Submitted: 2 years ago.
Category: Appliance
Expert:  AppTech8579 replied 2 years ago.

To exit test program, rotate cycle selector knob to Off.

Rating my answer "OK Service" or better is the only way I receive credit for helping you. Please let me know if you need additional assistance or have any other questions. Thanks!

Customer: replied 2 years ago.
I tried that before I contacted you and it did not work
Expert:  AppTech8579 replied 2 years ago.

To end test, push Spin selection button. IF this dont work then the control board is faulty and will need to be replaced.

Customer: replied 2 years ago.
The board is brand new both the main control board and the user front panel board are new
Customer: replied 2 years ago.
This was NO help at all. I will be demanding a refund this service was of no value