How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6160
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

Washer MHW7100DC0 was turned on with water supply off and

Customer Question

washer MHW7100DC0 was turned on with water supply off and displayed F08/E01 error code. Turned on water supply. Codes cleared but washer only hums (pump?). Flipped electrical breaker to reset washer, but humming continues. Door locked light is flashing.
Submitted: 2 years ago.
Category: Appliance
Expert:  MRANSWER replied 2 years ago.

The error code needs to be cleared before this will work because the washer thinks it has a leak, so it will not reset automatically. To reset this choose any 3 buttons except power. Within 8 secs press and release each one of the 3 after the other. Repeat this two more times- (1-2-3,1-2-3,1-2-3). If done right all the lights will come on with 88 or 888 in the display. To clear the code you need to press the 3rd button for 5 secs. You should see the error code show in the display; if any others show erase them as well.