How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1697
Experience:  worked on appliances for around 15 years
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

I just replaced the door latch on a 10 year old Maytag model

Customer Question

I just replaced the door latch on a 10 year old Maytag model MDB7601AWQ dishwasher with top & front controls. When I turn it on the time remaining display on the front flashes "2H" but it will not start when I push the Start button. I have jumpered out the door switches to make sure that was not the problem and it was not. I'm afraid the Start button on front membrane pad is bad. Any thoughts
Submitted: 2 years ago.
Category: Appliance
Expert:  AppTech8579 replied 2 years ago.
Your dishwasher does not have any failure codes programmed. The 2H displayed most likely is the delay 2 hours display. Turn the power off for 5 minutes then reapply power. This should reset the control.