How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

I recently received a replacement GE Monogram ZCGS150SS Trash

Customer Question

I recently received a replacement GE Monogram ZCGS150SS Trash Compactor and the rear wheels are recessed too far. The instructions say to adjust the wheels but don't say how to do this. I can find nothing to screw up or down. The large screws sticking up in front of the wheel pins will not turn in either direction and don't appear to be connected to the wheels anyway. How do I adjust the wheels?
Submitted: 2 years ago.
Category: Appliance
Expert:  Appliance Medic replied 2 years ago.
Welcome and thank you for your question. I will be the professional that will be assisting you.
Hi, the wheel is threaded just like the front. See the link below for a close up picture.