How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22244
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

No matter what cycle its in, my FAV6800 reaches end of wash

Customer Question

No matter what cycle its in, my FAV6800 reaches end of wash cycle & keeps on washing every few minutes. Never enters spin mode. I entered service mode, removed JP4 harness from motor control & did spin test. Made a screaching noise & only went to 48 rpm. What is my problem. Replaced motor control board, no help.
Submitted: 2 years ago.
Category: Appliance
Expert:  Kelly replied 2 years ago.
Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you! This machine has had some issues with the clutch assembly, shown as number 5 in the diagram below. It has been a source of trouble.
Given that you have noises accompanying the lack of spin, I suspect the clutch assembly will probably need to be replaced.
The link below is to the part you will need from a highly recommended company rated A+ with the Better Business Bureau. They offer a 100% money back guarantee, EVEN ON INSTALLED ELECTRICAL PARTS, for an entire year! They are the only company to allow returns on installed parts for a refund and offer a FULL ONE YEAR WARRANTY!