How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81253
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a 665 177 2k600 dishwasher...no lights on...tried a

Customer Question

I have a 665 177 2k600 dishwasher...no lights on...tried a known circuit and thermal fuse ...still nothing,,,120 volts at ac plug..?????
Submitted: 2 years ago.
Category: Appliance
Expert:  Tyler Z. replied 2 years ago.
To be clear, are you saying that you replaced the thermal fuse? The one clipped onto the control board itself inside the door?
Customer: replied 2 years ago.
Yes I did
Expert:  Tyler Z. replied 2 years ago.
OK if the thermal fuse has been replaced and you're sure the dishwasher is getting 120 volts to the junction box below the dishwasher where the power cord connects to the dishwasher itself, you just have a failed control board. The control board itself will need to be replaced I'm sorry to say.
Customer: replied 2 years ago.
Ok thanks...will go there next...
Expert:  Tyler Z. replied 2 years ago.
ok good luck
Expert:  Tyler Z. replied 2 years ago.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?