How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80264
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Cabrio washer with a opcode following an abbreviated wash cycle

Customer Question

Cabrio washer with a opcode following an abbreviated wash cycle with just three bath towels in the basket on Auto, low, and medium. A diagnostic check shows a F2 code. Just got out of storage following 11 months of inactivity. Has not been dropped or damaged in any way to the best of my knowledge.
Submitted: 2 years ago.
Category: Appliance
Expert:  Tyler Z. replied 2 years ago.
So the error code you're getting (F2) on a Cabrio washer means that your front interface control board isn't communicating with the main control board well. Take the control panel apart and make sure the ribbon cable between the interface board and main control board is secure. If so, then the front interface board would need to be replaced I'm sorry to say.
Expert:  Tyler Z. replied 2 years ago.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?