How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 22265
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

Sir my washing machining can not spin well?

Customer Question

hi sir my washing machining can not spin well?
Submitted: 2 years ago.
Category: Appliance
Expert:  Kelly replied 2 years ago.
Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you! Poor spinning is almost always the result of poor drainage. If you remove the rear panel from the machine, you will be able to access the drain pump. There is a filter that will unscrew to be removed so it may be cleaned. That probably needs to be cleaned out.
Customer: replied 2 years ago.
Hi kelly it still can not to spin well and I did that you told me that way.
thanks jimmy
Expert:  Kelly replied 2 years ago.
Is all the water draining out well? What happens after it drains?
Customer: replied 2 years ago.
yes Kelly the draining out well. but spinning very bad .nothing changed .could you tell me any way that posible to fix it.
Expert:  Kelly replied 2 years ago.
If it is draining well and spinning but not well, the issue probably lies with the clutch assembly, shown at the URL below.
If that is the case, the part is no longer available. I suspect you will need an on site technician to verify its failure or replace the machine.