How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Dave Your Own Question
Appliance Tech Dave
Appliance Tech Dave, Home Appliance Technician
Category: Appliance
Satisfied Customers: 2611
Experience:  30 years experience specializing in Whirlpool, KitchenAid and Kenmore
Type Your Appliance Question Here...
Appliance Tech Dave is online now
A new question is answered every 9 seconds

Whirlpool Duet model#WFW9151Y00 front load washer throws an

Customer Question

Whirlpool Duet model#WFW9151Y00 front load washer throws an occasional F9 E2 error code. It will go for days or weeks then it pops up. No rhyme or reason, all loads. Cleaned out all that can be cleaned out, repair center replaced a thermister, but still
Submitted: 2 years ago.
Category: Appliance
Expert:  Appliance Tech Dave replied 2 years ago.
Hello, this is Dave. Cleaning the pump often does correct this but this code is due to loss of continuity in the circuit from the main control down to the pump. The wires could be loose or there could be a pinched wire. If all that looks good it could be the pump itself. Since this is so intermittent you will need to try something without being completely sure it is the cause. If the wires and connections are good I suggest trying the pump.