How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Do you have the Reset Sequence Kenmore Model #665.1593200

Customer Question

Do you have the Reset Sequence for the Kenmore Model #665.1593200 Dishwasher?
The buttons I can press are:
Select Cycle
Heat Dry/Lock
I have replaced the Thermal Fuse, the machine now has a constant blinking Start light.
Thank you in advance
Submitted: 2 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 2 years ago.
Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 34 Years,
and have over 100,000 in home repairs and over 60,000 phone and internet repairs under my belt.
The reset as you call it is only for a clean light blinking 7 times.
If you have a start light blinking it is telling you that when you have pressed Start either the door was not closed or that the control board did not recognize that the door was closed.
When you tried to run a cycle after the thermal fuse was replaced did you have the door closed when you pressed Start ? or press start and closed the door before 5 second elapsed?