How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14791
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

I have a Dacor ERD36 range and am trying to replace the control

This answer was rated:

I have a Dacor ERD36 range and am trying to replace the control panel. How do I get the front panel off? It is attached to the bullnose assembly and while I have all visible screws off, it is still not coming off. Thanks!
Thanks for your question. Please remember to rate my assistance when we're done. Please talk with me first before rating negatively.

This one is a pain. Make sure you have the screws behind the knobs removed there is one for each knob. You have to get the top up on the unit to get the control panel to slip over the edge. Remove the burners and the nut on each burner to get the top to lift up to get it off.
Appliance Guru and 4 other Appliance Specialists are ready to help you