How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 79635
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

GLTF1670AS0 will fill with water and drain ,will lock the

This answer was rated:

GLTF1670AS0 will fill with water and drain ,will lock the door but will no agitate or spin . the clock does rotate
Hello, and thank you for using this service. I'll be helping you with your problem today.

So this is one of the more common problems with this front load washer unfortunately. The issue is that your motor control board has failed. The motor control board is responsible for telling the washer timer when to advance as well as controls the motor on how to move. This board is mounted to the floor below the tub and you access it by pulling the washer forward, unplugging the washer, and removing the screws going into the back panel. The part number you'd need to order for this modelNNN-NN-NNNNand it costs about $150.

Tyler Z. and 4 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.

Is there anyway to test it ?