How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14604
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

F&P 6.5 mod GW608U clothes washer prod code 93136

This answer was rated:

my F&P 6.5 mod GW608U clothes washer pumps & then stops ( on thermal cut out ?) then starts when pump has cooled. it cycles like this until water is gone then continues. Is it as simple as replacing pump. Where can  I get parts or genuine parts, on line or factory in South east Melbourne.

Thanks for using this service. Please be logged in to rate my assistance when we are done. Rating 3-5 is good, but 1-2 is bad so talk with me first.

Yes it sounds like the pump is just bad. Often the pumps would leak causing them to overheat and shut down. I would replace the pump on the unit and you should be good to go. You can order the pump through this site.
Appliance Guru and other Appliance Specialists are ready to help you