How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14604
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

I just installed a new "PartSelect" Electronic Clock Oven Control

This answer was rated:

I just installed a new "PartSelect" Electronic Clock Oven Control (Part #PS238593) for my double wall ovens and everything looks good, but neither oven will heat? It's like it's not connected to either heating or broiling elements.
Thanks for using this service. Please be logged in to rate my assistance when we are done. Rating 3-5 is good, but 1-2 is bad so talk with me first.

You likely burned out the high limit thermostat or it has tripped. They are mounted to the top of the unit. One is for the blower and the other is the high limit. If they both test open one is bad. They are part #158 and 159 at this link. Just jumper each out. Whichever turns the blower on is for the blower and the other one is for the heating elements.
Customer: replied 3 years ago.

Okay, thanks for the link. I can see them in the diagram. How do you test them?

With an ohm meter for continuity. Should have 0 ohms
Appliance Guru and other Appliance Specialists are ready to help you