How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Home Smithy Your Own Question
The Home Smithy
The Home Smithy, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9622
Experience:  30 years repairing appliances
Type Your Appliance Question Here...
The Home Smithy is online now
A new question is answered every 9 seconds

Hello, I just replaced the electronic display on my Bosch Stove

This answer was rated:

Hello, I just replaced the electronic display on my Bosch Stove model #HGS7152UC. When I try to start the oven it runs for about 90 sec then flashes "ERROR 160".

Can I fix this?

Thank you!

Hi. I'm Smitty. I am a professional appliance repair consultant here to help you diagnose, and repair, your appliance.

There should be a couple more numbers after the UC in the model number. I will need them to look up the information for you.

Thank you.

Customer: replied 4 years ago.

Bosch Stove model #HGS7152UC/01


Thank you. One moment please.

FYI: you have a bad cooling fan. Getting you the repair procedure now.


Scott, is your unit free standing or slide in type range?
Customer: replied 4 years ago.

It is a free standing unit. I suspect the trouble may be in the digital display as I have just replaced it. Is there a way to test the fan?

I am uploading the manual for you to work from. One moment please.

Okay, Scott. I uploaded the manual because there is just too much information that I would have to copy and post.

Please click here to download the manual.

Go to page 39 and begin there. It tells you how to configure the new board.

The error you see is due to the board not being configured correctly or it may just be the wrong board.

The manual will guide you to configure it correctly or point to the board being the wrong one.

If you do not understand something please let me know and I will be happy to hel;p you through it.

Please let me know if you have any other immediate concerns.
If not please select a positive rating at this time. Doing so will not close your question, and after you rate my service you may ask any followup questions you like. All at no additional charge.
Thank you for the opportunity to serve you.
Best, Smitty
**How to rate your expert**

Customer: replied 4 years ago.

This is a service guide for a washing machine.

OOPS!! My mistake. Sorry. Embarassed

Please click here.

The Home Smithy and 2 other Appliance Specialists are ready to help you