How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 80280
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

On a KSCS251, what tool is required to tighten the door ha

This answer was rated:

On a KSCS251, what tool is required to tighten the door handle?
Hello, and thank you for using this service. I'll be helping you with your problem today.

To tighten the screws, you actually need a size T10 torn bit screwdriver which you can pick up at almost any hardware store.

Please remember to rate my service once you have all the information you need. If you have any other questions, please ask me – I’ll be happy to respond. Thank you!

Customer: replied 4 years ago.
Is that screwdriver a "torn" or "torx"? I am not familiar w/ the "torn".
I'm sorry, that was a typo, I meant to say torx. The hole is actually a specialty allen wrench that isn't metric or US style, but a size 10 torx bit screwdriver works.
Tyler Z. and 2 other Appliance Specialists are ready to help you
Customer: replied 4 years ago.
No problem.