How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

#PLD2560LCC1 Frigidaire Dishwasher - bottom washer arm wont

This answer was rated:

#PLD2560LCC1 Frigidaire Dishwasher - bottom washer arm won't snap into place after cleaning it.
Hello, Thank you for using this service, I will be helping you with your problem today.. good afternoon, are the two clips still in place one this ? graphicor did one or both break off ?
Customer: replied 4 years ago.

Both clips are still in place

okay are you able to remove the spray arm support ? Lower Wash Arm SupportNNN-NN-NNNN      Alternate Product View
Customer: replied 4 years ago.

yes.

okay take it off and see if the spray arm snaps on with that off.
Customer: replied 4 years ago.

I just figured it out. The bottom screen wasn't snapped into place, and I found out what I did wrong. Thanks anyway!

oh okay, thats what I was getting to, good job thanks and best wises, Bryan
Bryan and 4 other Appliance Specialists are ready to help you