How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a LAFW3511KWO washer and have no Leds ,wont do anything

This answer was rated:

I have a LAFW3511KWO washer and have no Leds ,wont do anything I have the tech sheet but nothing about no leds lighting up,checked water inlet,ok,tryed removing door switch,not sure if it will stop leds from working,Visualy looked all over wiring and see no visiual shorts. Iv been a tech for 40 years but need some tricks.

Hello, Thank you for using this service, I will be helping you with your problem today

Do you have power going the machine control board ? graphic

Customer: replied 4 years ago.


okay how about the user interface ? is that getting power ?
Customer: replied 4 years ago.

Yes I have power tointerface

okay just went over the tech sheets. check power to the main control board at J1 you should have power there. if you do the main control board has failed and needs to be replaced . Main Control BoardNNN-NN-NNNN      Main Product View the door switch wouldn't cause no led light up on this.
Bryan and other Appliance Specialists are ready to help you