How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Maytag Gemini Dual Oven after about 15 minutes an

This answer was rated:

I have a Maytag Gemini Dual Oven
after about 15 minutes an alarm comes on F1-2.
what does it mean. How can I get a repair manual to trouble shoot it?

Hello, Thank you for using this service, I will be helping you with your problem today

The error means

Runaway Cook Lower oven. accentually it means the lower oven overheated or at least the control thinks it did. you need to replace the lower oven temp sensor. (probe) its number 7 on the diagram and sticks out inside the oven on the back wall. Oven Sensor 12001656        Main Product View heres a link where you can order this. . hope this helps, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 4 years ago.

I'm still working on my Maytag oven. I was going to replace the sensor as I
was told, but I saw the video link and watched it. I have a reading of 1078
ohms. so that is within the tolerances. Any other Ideas before the mother


this is the scale of resistance.

100 Degrees F 1143 Ohms

200 Degrees F 1350 Ohms

300 Degrees F 1553 Ohms

350 Degrees F 1654 Ohms

400 Degrees F 1753 Ohms

500 Degrees F 1949 Ohms

600 Degrees F 2142 Ohms

700 Degrees F 2331 Ohms

800 Degrees F 2516 Ohms

900 Degrees F 2697 Ohms

1000 Degrees F 2874 Ohms

it seems your is low. I pulled these from the maytag service tech sheets.

Set meter to RX1000 Scale

and retest