How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My GE stove stopped working after a cleaning cycle, I have

This answer was rated:

My GE stove stopped working after a cleaning cycle, I have an error saying LOC DOOR everytime I try to preheat oven or broil, I get nothing?

Hello, Thank you for using this service, I will be helping you with your problem today

good afternoon, if the door unlocked after the self cleaning cycle the micro switch on the latch assembly has failed. the board still thinks this is in self clean mode so you can use any other function. you will need to replace the switch. this is under the top of the range. you can order this for $8.80 at the following link.

Bryan and other Appliance Specialists are ready to help you
Customer: replied 4 years ago.

How do I get to this piece ?

this is a sealed burner stove top so you have to remove the screws under the burner cap. screws number 122 on this diagram be careful not to strip them, once they are out the top lifts up and gives you access to the latch assembly.