I tried to get back to you yesterday but could never get back to this page. I've rechecked the wireing and I have a drawing of the wires.
Type of Appliance: Oven & Range
Model Number: JBP66WK2WW
What have you tried so far?: Bought a replacement 9" dual element Haliant burner (part #WB30T10044). I had to remove the old burner to get the part number and I did not map the wireing hook up before removing it. Now I need to know what the proper hook up is to put the new repacement burner on. There are 2 switches on the burner. One switch has 3 "male" terminals. One side of this switch has one terminal and the other side of the switch has two terminals. The second switch has two "male" terminals, both at the front of the switch. That's a total of five male terminals on the two switches. I have five wires with "female" connectors. The wire colors are as follows: 1 single - Black 1 single - Blue 1 single - Blue 1 double - Blue with black stripe and Black** 1 double - White with blue stripe and Black** **The Black wire is just a short "bridge" wire connecting the Blue with black stripe wire to the White with blue stripe wire. Can you please tell me how to hook these to the five terminals on the burner?