How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Parts Your Own Question
Appliance Parts
Appliance Parts, Home Appliance Tech
Category: Appliance
Satisfied Customers: 267
Experience:  Appliance tech since 1992. Factory authorized
70080267
Type Your Appliance Question Here...
Appliance Parts is online now
A new question is answered every 9 seconds

How do I put a new door on my whirlpool microwave after I take

This answer was rated:

How do I put a new door on my whirlpool microwave after I take the old broken one off? I have the door.
Hi my name isXXXXX have been an appliance repair tech since 1992.
Do you have the full model number off the microwave itself? Should be located inside the cavity. Thank you
Customer: replied 4 years ago.


the model # XXXXX

Yes most videos will only show the handle replacement procedure. But if you want to put a new door on you must angle the bottom door in first to the lower bracket. Then ease up on the door to the top hinge. Then allow the top to fall into the upper bracket. Then the bottom will fall also in place. Sometime you may have to use a putty knife to pry down on the bottom door hinge so enough clearance will allow the door to come out of the bracket.
Appliance Parts and 4 other Appliance Specialists are ready to help you
Did this help you, i do not show any response to the answer?
Thank you
Customer: replied 4 years ago.

Well I had to leave home before my husband got to it . So I don"t know . But if he screwed it up not your fault thanks.


 

Good luck to him, and if he has anymore questions come back here.
Thanks!