How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Kenmor front loading washer . How to remove the electronic

This answer was rated:

Kenmor front loading washer . How to remove the electronic cluster to get the front
panel off to install the gasket ?

Hello, Thank you for using this service, I will be helping you with your problem today

can you get us the model number ?

Customer: replied 4 years ago.

HE2T mod. 110 47 58 1601

okay, the first thing you need to do is remove the top. there are screws in the back for that, remove the screws and lift the top at the back and slide it out from under the front panel. then there are screws that hold the control panel in. pull your dispenser out also and make sure theres not any screws holding the control there. (some have them some don't. I'll try and find you a video to help also.
Bryan and other Appliance Specialists are ready to help you
take a look at this video.