How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Kenmore 70 series model #66722694 stopped working, it is

This answer was rated:

My Kenmore 70 series model #66722694 stopped working, it is clicking when you turn the minutes on, door catch still working, vent on dryer is clean

Hello, Thank you for using this service, I will be helping you with your problem today

so this just wont start ?

Customer: replied 4 years ago.

wont start, reset breaker panel, dryer vent is clean

okay, the thermal fuse has blown. this is common on these. Thermal Fuse(NNN) NNN-NNNNMain Product Viewdo you own a volt meter ?
Customer: replied 4 years ago.



Customer: replied 4 years ago.

what do I do if I can get one

okay hang on I'll right out how to do it without one, please do not respond. It erased my whole answer once already. be right back
pull the dryer out and unplug.remove the back panel, on the left side bottom you will see the thermostat, pull both wires and tape them together, plug the dryer in and try it .if it starts replace the thermal fuse. heres a link to order it. thanks and best wishes, Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions