How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6160
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

4 YEAR OLD BOSCH F/L MODEL #WFVC3300UC/19, WITH ERROR CODE

This answer was rated:

4 YEAR OLD BOSCH F/L MODEL #WFVC3300UC/19, WITH ERROR CODE E: . JUST E NO NUMBER. I PUT IT INTO DIAGNOSTIC MODE AND ON P01 I'M GETTING E01 FLASING 1st, FOLLOWED BY C02.
E01 is a door latch issue, so there is either a latch issue or the control board is not actuating it. The latch is much less, so I would try that first.
MRANSWER and other Appliance Specialists are ready to help you
Customer: replied 5 years ago.


Door latch assembly and door hinge have already been replaced 4 weeks ago, for an E01 condition. This error code came up a few days ago.

There were only 2 possibilities as I said. You are now left with a bad control as the reason for the issue.