How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Whirlpool Cabrio washer is throughing an F1 error several

Resolved Question:

My Whirlpool Cabrio washer is throughing an F1 error several times throughout the wash cycle. Please tell me that whatever is wrong with this fairly new expensive washer and dryer set is covered under warranty!!!
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.
Hello, Thank you for using this service, I will be helping you with your problem today

do you have the model #?
Customer: replied 5 years ago.
its a model WTW6400SW2 type: 580
Expert:  Bryan replied 5 years ago.

F1(F68)-Pressure Signal Out-of-Range. the control is not reading the water levels correctly. your Machine/motor control and water pressure transducer has failed. you need to replace it. you can order this at the following link and theres a video on how to replace it also.

thanks , Bryan

Expert:  Bryan replied 5 years ago.
this machine if its less than a year old should be covered under the warranty. contact whirlpool at


Bryan and other Appliance Specialists are ready to help you