How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

How do you reset the panel of the fridge? The water, ice,

Customer Question

How do you reset the panel of the fridge? The water, ice, light do not work. The door alarm and reset button are on. I have replace the water filter.
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.
Hello, Thank you for using this service, I will be helping you with your problem today

can you get us the full model # ?
Customer: replied 5 years ago.
the model # XXXXX: MF12266AEW
Expert:  Bryan replied 5 years ago.
1. Press and hold the Door Alarm Keypad .
2. Press and hold Freezer Temperature Down Keypad within 3 seconds .
3. Release the Door Alarm Keypad and wait 3 seconds.
4. The control will display PE to indicate the programming mode.
5. Entry is confirmed by pressing the Freezer Temperature Down Keypad once more.
6. The control will display the current Program CODE. This value should be validated with the
Program CODE printed on the unit serial plate.
Expert:  Bryan replied 5 years ago.
The Programming mode can be exited at any time by pressing Door Alarm key for 3 seconds or
will exit if unattended for four minutes.
Expert:  Bryan replied 5 years ago.
NOTE: The Program Code is located on the Serial Plate on this unit after the word Code.
Customer: replied 5 years ago.
Nothing happened
Customer: replied 5 years ago.
Any thoughts?
Expert:  Bryan replied 5 years ago.
okay this means the main control board has failed, you need to order and replace it, its located on the back of the refrigerator # XXXXX on this diagram.
Expert:  Bryan replied 5 years ago.
heres the board, Main Control Board W10164420 Main Product Viewyou can order this at this link control board sorry for the bad news and the problems replying. theres a problem with the site, well wishes, Bryan
Bryan and 3 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.
I was able to reset. PE1515 came up and now I have 0 and 37, the "replace" light on and the "light" stays on. No water or ice coming out but the ice is being made.

Do you still think it is replace the main control board?
Expert:  Bryan replied 5 years ago.
Give me a few minutes to look over the controls and diagrams. I'll be back shortly.