How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

working on a duet gas dryer model#wgd3000swo I replaced a broken

This answer was rated:

working on a duet gas dryer model#wgd3000swo I replaced a broken belt successfully and tested all thermal safties and operating thermostats all good. When I dismantled front of machine the dashboard here the ttimerknob and controls fell on the floor. The wiring harness disengaged from the dashboard control board and fell on the floor. I can't find a place on the dashboard control board to replug the wiring harness...Need help

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


are you getting this model # XXXXX the inside of the dryer door on the machine itself ? its not comming up.

Customer: replied 5 years ago.
Ill recheck model # XXXXX just a minute
Customer: replied 5 years ago.
yes the correct model is wgd8300sw0 duet by whirlpool
okay was it the blue harness that came off ?
Customer: replied 5 years ago.
yes exactly
okay this plugs into the board itself, there are small pins it plugs onto. you can see the position its supposed to be connected. can you see the pins on the board ?
Bryan and 4 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.
no i cannot I examined the board for over an hour...Could the pins break off the board when it hit the floor?