How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9949
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

i have a wrlpool dryer modle wgd6200sw1 with a sensor light

Customer Question

i have a wrlpool dryer modle wgd6200sw1 with a sensor light on the dryer shut off in maybe 10 sec stays offfor maybe 2min then same thing
Submitted: 5 years ago.
Category: Appliance
Expert:  Appliance Man replied 5 years ago.
Hello. Thank you for choosing Just Answer. I will be helping you with your question today.

-Could you explain your situation a little more?
Customer: replied 5 years ago.

wires and sensors were cleaned also. Dryer will run for about 10 seconds then stop with the light in sensing.

 

Expert:  Whrlp Master Tech replied 5 years ago.

I see Appliance Man has opted out .

I will try to assist you .

When it shuts down does it come back on by itself?

Customer: replied 5 years ago.

no - it's in like a pause state - lights still on

 

Expert:  Whrlp Master Tech replied 5 years ago.
What do you have to do to get it to come back on ?
Customer: replied 5 years ago.
turn it off and start again
Expert:  Whrlp Master Tech replied 5 years ago.
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9949
Experience: 30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Whrlp Master Tech and 2 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.

will this explain where the part is and how to change it?

 

Expert:  Whrlp Master Tech replied 5 years ago.

No,

The part is in the console and it has harness connections that just plug in .

This will help you open the console.

http://www.youtube.com/watch?v=xGIG8Wo5-N4

 

Customer: replied 5 years ago.

changed part - no difference

tried diagnostic test displayed 11,12