How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I placed my oven on a quik clean cycle. An hour into it the

This answer was rated:

I placed my oven on a quik clean cycle. An hour into it the front display flashed PF. I checked all GFI outlets and the outside circut breaker. The oven will not heat anymore and it did not complete the clean cycle.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


You must have tripped the thermal protector, in the oven, you will need to push the red button to reset it, this is located on the roof of the oven behind the control panel, you will need to shut the breaker off before open the control panel however it's part number 119 on this diagram, this will take care of your issue, thanks and happy holidays, Bryan

Customer: replied 5 years ago.
not seeing it there. is it underneath the metal sheeth cover?
it should be , some are on the back I hope your isn't, you would need to pull the oven.
Customer: replied 5 years ago.
ok, how do I pull the oven?
I cant finish this question tonight I'm going off-line soon will you be on tomorrow?
Customer: replied 5 years ago.
yes. I may bury the oven before problem.
sorry been on since 5 this morning.
Customer: replied 5 years ago.
thank you
no problem
Bryan and other Appliance Specialists are ready to help you