How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Maytag gemini double-oven model mer6755aas when i

This answer was rated:

I have a Maytag gemini double-oven model mer6755aas when i turn on my stove top i first get error code h3,133 on the display then the burners don't light up or show to be working

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


let me look up the service manual. I'll be back in a bit

Customer: replied 5 years ago.
that code isn't comming up in the manual, I'm still looking, may take a bit

try this,


H3 Controlled Diagnostic Code


Press and hold Upper Cancel and

Timer for 3 seconds within 5 minutes

of power up.

See "Quick Test Mode."

Cycle through the codes.

The last 5 diagnostic codes will be stored

in the non-volatile memory.

See "Description of Error Codes" for


Customer: replied 5 years ago.
well I tried that but nothing shows on the display panel until I turn on the burners then i get h3,133.After i did the upper cancel and tmer for 3 seconds within five minutes. I get code 1 lc lc

okay this is a burner issue, sorry , I completely forgot the burners have there own codes, give me a bit


Customer: replied 5 years ago.
Are you still working on the problem,Bryan. Still waiting on an answer. What can you tell me.
its saying its an issue with the control, an internal programing error on the board , try and unplug the unit for 60 seconds to reset the control board and if that doesn't work then replace the control clock board.
Customer: replied 5 years ago.
Ok I will try that and see what happens,Bryan.