How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Whirlpool Model GHW9100LW1 | Hold to Start Button failure |

This answer was rated:

Whirlpool Model GHW9100LW1 | Hold to Start Button failure | Q: Would replacing the Electronic Control Assembly be the only remedy for a "Hold to Start Button" failure?

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


Unfortunately yes, replacing the control assembly or what's called the user interface is the only way to solve this problem, we see this a lot, the button itself inside the user-interface is what goes bad on these or at least the switch inside does, but these are sealed you can take them apart and fix the switch itself, so yes you have to replace this..

Bryan and other Appliance Specialists are ready to help you