How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Johnston Your Own Question
Tom Johnston
Tom Johnston, Home Appliance Technician
Category: Appliance
Satisfied Customers: 8007
Experience:  20 years experience
Type Your Appliance Question Here...
Tom Johnston is online now
A new question is answered every 9 seconds

The peg that we ordered to replace the one in our Whirlpool

Customer Question

The peg that we ordered to replace the one in our Whirlpool Designer Refrigerator was not the right one.

We have a photo of the broken peg that needs to be replaced and the hole in the wall of the refrigerator where it inserts.

We need the correct peg to make the repair.
Submitted: 6 years ago.
Category: Appliance
Expert:  Tom Johnston replied 6 years ago.
Hi welcome to just answer my name is XXXXX XXXXX i will be helping you today with your problem.
Can I have the model # XXXXX the fridge please.

If this has been helpful please press accept.Smile
Customer: replied 6 years ago.
I am away from our house right now on travel, and won't be back for 2-3 weeks. However, we did send this information in previously and have photos of the actual item that we can send if this is possible.
Expert:  Tom Johnston replied 6 years ago.
Ok that is fine.
Tom Johnston and other Appliance Specialists are ready to help you
Customer: replied 6 years ago.

Do you want me to send you the photos? I am trying to figure out how to upload them to you.

Expert:  Tom Johnston replied 6 years ago.
If you can that would be good. But I really need the model # I may be able to find the right one with a pic but it would be easier with the model #