How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Will you tell us how to get the face plate off of the front

This answer was rated:

Will you tell us how to get the face plate off of the front of the frig where the water comes out, the line has slipped up so it goes everywhere when turned on
Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today. lets get started.

can you recheck the model # ? its not comming up,this should be a tag on the inside of the refrigerator section either on one of the walls or on the ceiling can you check that? thanks Bryan
Customer: replied 6 years ago.
are you trying to get the dispenser module off?
Customer: replied 6 years ago.
Yes, the water line to get water out of the door beside where we get ice out of the door has slipped up and the water goes everywhere when the lever is pushed. We had a repairman out when it did last year and he show us how to put it back in but we don't know how to get the faceplate off to get to the line
Okay, slide the little water Plate out number 23 on this diagram, and behind that there are three screws number 82 on the diagram remove those and slide the fascia plate up, this will release from the top and then you can remove it, here is the diagram, from there it should be pretty simple, thanks and well wishes, Bryan
Bryan and other Appliance Specialists are ready to help you