How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81819
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a kenmore washer model 110.20722990 that wont drain.

Customer Question

I have a kenmore washer model 110.20722990 that won't drain. I was told to check the pump for blockage and belts at the rear lower of the machine. How do you get the back panel off!!!
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

You don't take the back of the washer of on this model. You need to remove the entire outer shell off to access the internals inside the washer. Below is a link to a video that will show you how to remove the outer shell of the washer.