How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 81829
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

my water protection system has activated,due to a error by

Resolved Question:

my water protection system has activated,due to a error by my self ,how do i erase the fault,and resume use/
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

You can't just reset the error, you must drain the water out of the washer. To do so, you need to tip the washer forward at a 45 degree angle and put a towel under the bottom. The water will drain out within about 2 minutes. You can then set the washer back up and press and hold the clear/off button for 5 seconds to turn the washer off and reset the error.
Tyler Z. and other Appliance Specialists are ready to help you