How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

I have a Quiet Partner II (without heated dry connected due

Resolved Question:

I have a "Quiet Partner II" (without heated dry connected due to a technicality), and "Hi Temp Wash" is blinking incessantly on the status panel. There is something I can press 2x2 only I forgot what buttons they are to get all the lights to light up and stop the blinking.
Do you know what (and the order) of these buttons is?
Submitted: 6 years ago.
Category: Appliance
Expert:  Appliance Medic replied 6 years ago.
Normal " High temp " Normal" High temp

Let me know that should do it though
Customer: replied 6 years ago.
That doesn't work. The Hi-Temp is blinking. Only it's something like that. Again, the heater never was hooked up on ours.
Expert:  Appliance Medic replied 6 years ago.
Normal" heated dry normal heated dry should also work. That is the two ways friend. Turn the breaker off for a min and try again
Appliance Medic and 5 other Appliance Specialists are ready to help you