How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

maytag french door bottom freezer ice shoot keeps flapping

Resolved Question:

maytag french door bottom freezer ice shoot keeps flapping and blinking lights
Submitted: 6 years ago.
Category: Appliance
Expert:  Appliance Medic replied 6 years ago.

This is a very common issue on these units. The HV control board on the back of the refrigerator will need to be replaced. The repair is very straight forward and simple. Pull the refrigerator out, on the left back side there is a small metal housing. Remove the 1/4 inch screws that hold the metal plate on. The control board has a plastic shield that protects it. Very easy to remove, use a small screw driver to pry the tab up, lift the plastic cover out. The control is held to the back of the refrigerator with several small tabs, again use the small screw driver to lift the control board out.

Un plug the refrigerator before you start the repair.

You can purchase the part from the link below.

HV Control Board Link

Let me know
Appliance Medic and 4 other Appliance Specialists are ready to help you