How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12157
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

TRIED TO SET TIME ON A magtag stove, now it displayes 5Ab and

Resolved Question:

TRIED TO SET TIME ON A magtag stove, now it displayes 5Ab and it will not do any thing else. no response from any other buttons
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


Good morning, does your clock assembly look like this one? It may be a different color white or beige but does it look like this one?

Customer: replied 6 years ago.
Expert:  Bryan replied 6 years ago.
Okay, unfortunately the code you are getting is not a valid error code, what this means is the clock assembly has failed, when this happens it can sometimes throw up an odd code that doesn't make any sense, in other words there is no 5ab code, you will need to replace the clock assembly, was it black just like the one I showed you?
Customer: replied 6 years ago.
It looks the same but the stove is almond color
Expert:  Bryan replied 6 years ago.

Okay so you need the Almond color, the part number you need to get is, 5701M753-60 this is the in stock at the following link. you can just click on the blue link and you can order this there, unfortunately you will need to replace it, hope this information has been useful, here is a diagram to help you get to the clock to replace it, you need to remove the back panel number 12 on the diagram to get to it, make sure the range is unplugged before doing this,thanks and best wishes, Bryan

Bryan and other Appliance Specialists are ready to help you