How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a whirlpool gold dishwasher 400 I believe on the front

Resolved Question:

I have a whirlpool gold dishwasher 400 I believe on the front panel the pot & pan & normal lights are flashing & of course it wont start. What is the protocol to reset it? Thanks Mark Altman
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


try this , Reset code: Push 1. Heat Dry 2. Normal 3. Heat Dry 4. Normal

Customer: replied 6 years ago.
That didn't work what next?
Expert:  Bryan replied 6 years ago.
I'm looking up the service manual now, I'll get back to you, thanks Bryan
Expert:  Bryan replied 6 years ago.
can you recheck the model # ? I cant bring this up.
Customer: replied 6 years ago.

OK not a problem it worked fine last night. I have two numbers

GU2700XTSQ1 & FU1505067 serial #

Customer: replied 6 years ago.

Those are the only two numbers in the door area. it's about 3 years old.


Expert:  Bryan replied 6 years ago.
try pressing saniinse/dry/santirinse/dry buttons in that order. tell me if it resets then, also if that doesnt try shutting the breaker off for five minutes then back on. if that doesnt work the control is bad. thanks bBryan
Bryan and 5 other Appliance Specialists are ready to help you