How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Have mdl # XXXXX Front load (washer) door needs adjustment to

Resolved Question:

Have mdl # XXXXX Front load (washer) door needs adjustment to engage drum. How do I make this adjustment?
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


Unfortunately it's not an adjustment that's the problem here, you need to replace the door switch assembly, this is a common failure on these they're made of plastic and they break easily inside is why when you apply a little bit of pressure it will start to run, you can order this at the blue link below, hope this info is useful, thanks and well wishes, Bryan

Bryan and 2 other Appliance Specialists are ready to help you